Mizuno T22 Satin Chrome Wedge - Custom Fit From  €179.00

1 - Hand Choice
Choose Option
Mizuno Hand Choice
It's fair to say that this option is self explanatory...Choose Right Hand if you are Right Handed...Choose Left hand if you are Left Handed.
2 - Loft & Bounce
Choose Option
Mizuno Loft & Bounce
Loft angle affects both trajectory and distance; the more loft, the higher the trajectory. A wedge with more bounce is easier to play from soft sand or grass because it will naturally fight the tendency to dig in. A wedge with less bounce tends to dig more, and is better for firm conditions when digging is more difficult.
3 - Shaft Selection
Choose Option
Mizuno Shaft Selection
This option allows you to choose which shafts you would like to have. There are a number of shaft choices available to meet the different needs of golfers. If there is a particular shaft you require which is not listed please e-mail us to ensure it's availability and compatibility with these irons.
4 - Grip Choice
Choose Option
Mizuno Grip Choice
Please Choose the Grip you would like to have on your club.
5 - Grip Size
Choose Option
Mizuno Grip Size
This is where you can choose the size of the grip on your club. Some golfers are happy to play with the standard grip whilst others prefer a thicker grip,i.e. Midsize. The grip thickness is achieved by applying tape to the club shaft underneath the grip. Here you can choose to have between 1 and 5 lengths of tape with 1 being standard and 5 being midsize.
6 - Choose Length
Choose Option
Mizuno Length
Having the proper golf club length is a key ingredient to being able to make a good golf swing. Clubs that are too short or too long will hinder your ability to rotate and properly transfer your weight during the swing. It could also cause you to ground the club too early if they are too long or top the ball if they are too short.
7 - Lie Angle
Choose Option
Mizuno Lie Angle

Lie angle is the angle between the bottom, or sole, of the golf club and the shaft. Having the proper lie angle is critical if you want the opportunity to make accurate golf shots. The purpose in adjusting the golf club's lie angle is to ensure that the club is resting squarly on its sole when you are addressing your shot. This will help get your swing on the right plane and keep the clubface square at impact. A lie angle that is too upright will cause the heel of the club to hit the ground first, which will close the clubface and produce a pull or hook. A lie angle that is too flat causes the toe to hit the ground first, opening the clubface, which will result in a push or slice.

  • Description
  • Reviews
  • Price Match Request
Mizuno Logo


More than fifty years of refining our Grain Flow Forging process in Hiroshima, Japan – ensure that Mizuno wedges are unrivalled for touch and feel around the green. Played by one of the greatest short-game players of any generation - Luke Donald. Now with an additional soft feel copper underlay and the option of 4 levels of sole grind.



One-piece Grain Flow Forged HD Boron at Mizuno's iconic facility in Hiroshima, Japan – where Mizuno irons have been produced since 1968.


A microlayer of copper beneath Nickel Chrome – for an extra millisecond of control at impact.


A slightly more compact profile with an extensively bevelled top edge – creating the appearance of a thinner edge.


By flaring or tapering the upper portion of the blade, the T22 creates a higher consistent spin and a more penetrating trajectory.


Mizuno's HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop off.


Quad Cut Milled and loft specific – cut into Boron infused steel for a longer effective lifespan.


Raw steel comes without soft copper underlay – but will rust over time for a look requested by many of our tour players.

S-Grind Minimal sole grind for fuller shots & lower lofts

D-Grind Moderate Heel & toe relief. Allows gentle manipulation of the club face

C-Grind Heavy heel & toe relief. For skilled players & firmer conditions. 

X-Grind Extreme relief from the heel, toe & trailing edge. For short game artists. 


T-22 S Grind Wedge Specification

Club # Loft ° Lie Angle Length (inch) Bounce
45/05 45 63 35.5 5
46/06 46 63 35.5 6
47/07 47 63 35.5 7
48/08 48 63 35.5 8
49/06 49 63 35.5 6
50/07 50 63 35.25 7
51/08 51 63 35.25 8
52/09 52 63 35.25 9
53/10 53 63 35.25 10
54/12 54 63 35.25 12
55/13 55 63 35.25 13
56/14 56 63 35.25 14
57/15 57 63 35.25 15
58/16 58 63 35.25 16

T-22 D Grind Wedge Specification

Club # Loft ° Lie Angle Length (inch) Bounce
54/08 54 63 35.25 8
55/09 55 63 35.25 9
56/10 56 63 35.25 10
57/11 57 63 35.25 11
58/12 58 63 35.25 12

T-22 C Grind Wedge Specification

Club # Loft ° Lie Angle Length (inch) Bounce
56/06 56 63 35.25 6
57/07 57 63 35.25 7
58/08 58 63 35.25 8
59/09 59 63 35.25 9
60/10 60 63 35.25 10

T-22 X Grind Wedge Specification

Club # Loft ° Lie Angle Length (inch) Bounce
58/04 58 63 35.25 4
59/05 59 63 35.25 5
60/06 60 63 35.25 6
61/07 61 63 35.25 7
62/08 62 63 35.25 8

Please note that MIZUNO lead times are sitting between 60-90 days, even if all components are in stock, due to a large number of orders awaiting to be built. Whilst we will expedite orders to our customers as soon as the product is received into our warehouse, delays that Mizuno experiencing are beyond our control.

Halpenny Golf currently serve over 125,000 returning customers and we pride ourselves in working to exacting international quality management standards. Our staff have a passion for Golf. With a PGA Professional in every store our customers can be sure that they get the best and most suitable advice for their every golfing need. We try harder to please, so buy with confidence at Halpenny Golf, the trusted Professionals.

Our Best Selling Mizuno Custom Fit Wedges
Loading ...
Our Best Selling Custom Fit Wedges
Loading ...
Our Best Selling Mizuno Products
Loading ...